The Adjustable Lens Holder for the Basic Optics System is designed for use with lenses and mirrors with diameters between 19 mm and 75 mm. Simply place the lens or mirror in the holder and adjust the three arms to hold it. A set screw in each adjustable arm ensures that the mirror or lens will remain in place. The holder snaps into the Basic Optics Track and is designed to position all mirrors and lenses at the same height as the rest of the Basic Optics System components.
Features
- Holds circular optics components between 20 and 75 millimeters in diameter
- Has three locking adjustable arms
- Snaps into 60 cm or 120 cm Basic Optics Benches or the Dynamics Track Optics Carriage
How It Works
The holder has three sliding arms that can be adjusted for different-sized lenses. Each arm is marked with a range of diameters corresponding to the diameter of the lens to be held, from 20 mm to 75 mm. Line up the appropriate diameter marks on the two lower arms with triangular marks on the ring. Rest the edge of the lens in the lower two arms then slide the top arm down. A set screw in each adjustable arm ensures the lens or mirror will remain in place.
What's Included
- 1x Adjustable Lens Holder (lenses not included)
