Product Summary
With these wireless hand grips, conducting physiology labs on the cardiovascular system or homeostasis is easier than ever before. Continuously monitor heart rate during exercise, or use the sensor to take initial and final measurements with fast and reliable heart rate detection.
Educational Use Only
This is not a medical device. PASCO products are designed for educational use only and should not be used in any apparatus involved with life support, medical testing, patient diagnosis, or industrial control/testing systems.
What's Included
- 1x Hand-grips
- 1x Bluetooth® Heart Rate Module
- 1x Coin-cell battery
Product Specifications
| Approximate Mass | 218 g |
| Range | 0 bpm to 240 bpm |
| Resolution | 1 beat |
| Accuracy | ± 1 bpm |
| Connectivity | Bluetooth 5.2 |
| Maximum Sample Rate | Every two seconds |
| Default Sample Rate | Every five seconds |
| Logging | No |
| Battery Type | Coin Cell |
Battery & Logging
| Stored Data Points Memory (Logging) 1 | Not Supported |
| Battery - Connected (Data Collection Mode) 2 | >200 hr (2-3yrs of normal classroom use)* |
| Battery - Logging (Data Logging Mode) 3 | Not Supported |
| Battery Type | Coin |
1 Minimum # of data points with all measurements enabled, actual results depend on enabled measurements.
2 Continuous use in a connected state until battery failure, actual results will depend on sample rate, active measurements, and battery condition.
3 Logging until battery failure, actual results will depend on sample rate, active measurements, and battery condition.
* Normal classroom use is the sensor in active use for 20min/lab for 120 lab periods/yr.
Data Collection Software
This product requires PASCO software for data collection and analysis. We recommend the following option(s). For more information on which is right for your classroom, see our Software Comparison: SPARKvue vs. Capstone »
Connectivity Options
This product can connect directly to your computer or device with the following technologies. No Interface required. See the following guide for details regarding device compatibility: Wireless Bluetooth Product Compatibility »
Dedicated Datalogging with SPARK LXi2
Consider an all-in-one, touchscreen data collection, graphing, and analysis tool for students. Designed for use with wired and wireless sensors, the SPARK LXi2 Datalogger simultaneously accommodates up to five wireless sensors and includes two ports for blue PASPORT sensors. It features an interactive, icon-based user interface within a shock-absorbing case and arrives packaged with SPARKvue, MatchGraph!, and Spectrometry software for interactive data collection and analysis. It can additionally connect via Bluetooth to the following interfaces: AirLink, SPARKlink Air, and 550 Universal Interface.
Buying Guide
| Also Available |
P/N |
Price |
|
USB Bluetooth Adapter
Required by older computers without bluetooth 4.0 or later
|
PS-3500 |
-- |
Experiment Library
Perform the following experiments and more with the Wireless Hand-Grip Heart Rate Sensor.
Visit PASCO's Experiment Library to view more activities.
Middle School / Life Science
In this lab, students use heart rate sensors to measure their heart rates while standing, lying flat, and lying flat with both legs raised.
High School / Biology
Students use a hand grip heart rate sensor to learn about the circulatory system by monitoring their heart rate while resting and while exercising.
High School / Biology
Use a PASPORT heart rate sensor to monitor the effect of physical exertion in relation to level of fitness. Determine the average heart rate before, during, and after exercise. Note: This investigation has been updated for Wireless...
Middle School / Life Science
In this lab, students will use heart rate sensors to determine their resting heart rates, their heart rates with exercise, and their recovery heart rates.
